Free Shipping on orders over 500$*

Best Quality/Price on the Market

Qualified Technicians to Support You
1 5
Victron Energy  |  SKU: BOS-BMS-SMART-BMS-CL-12-100  |  Barcode: 8719076046851

Victron Energy Smart BMS CL 12/100 | BMS110022000

$171.85 CAD
Shipping calculated at checkout.

The Smart BMS CL 12/100 is a Battery Management system for Victron lithium-iron-phosphate (LiFePO4) Smart Batteries. It has been specifically designed for 12V systems with a 12V alternator.

The BMS CL 12/100 monitors and protects each individual battery cell within the battery (or battery bank) and will disconnect the alternator, charge sources or DC loads in case of low battery voltage, high battery voltage or over temperature.

Warranty

This product is covered by a 5 year limited warranty

Delivery and Shipping

Orders are shipped within 2 business days. If a problem prevents us from shipping your order within this time, we will notify you.

Depending on your delivery location, transit time will vary from 1 day to 5 days

Note for US and Internationnal buyers: the customer is responsible for paying any import costs to the shipping carrier, such as duties, import taxes, or brokerage/disbursement fees which may apply upon delivery.

Datasheets Manual

Other available models of Victron Energy BMS for lithium batteries

Victron Energy Battery Management System (BMS) Overview
Victron Energy BMS400100000 smallBMS for lithium battery - top
Victron Energy smallBMS with pre-alarm | BMS400100000
View details
Victron Energy BMS300200200 VE.Bus BMS V2 for lithium battery - top
Victron Energy VE.Bus BMS V2 | BMS300200200
View details
Victron Energy BMS110022000 Smart BMS CL 12-100 for lithium battery -top
Victron Energy Smart BMS CL 12/100 | BMS110022000
View details
Victron Energy BMS210055000 Smart BMS 12/200 for lithium battery -top close
Victron Energy Smart BMS 12/200 | BMS210055000
View details
Victron Energy LYN034160200 Lynx Smart BMS 500 (M8) for lithium battery - front
Victron Energy Lynx Smart BMS 500 (M8) | LYN034160200
View details
Price
Price
$69.22 CAD
$219.59 CAD
$171.85 CAD
$294.77 CAD
$824.64 CAD
Victron Energy lithium LiFePO4 BMS selection guide

Victron Energy Smart BMS CL 12/100 | BMS110022000

The Smart BMS CL 12-100 is an all-in-one battery management (BMS) system for Victron Lithium Battery Smart 12,8 V batteries available with a nominal voltage of 12.8 V in various capacities. This is the safest of the mainstream lithium battery types. The maximum number of batteries in one system is 20, which results in a maximum energy storage of 84 kWh in a 12 V system. It has been specifically designed for 12 V systems with a 12 V alternator such as in vehicles and boats.

A dedicated alternator input provides current limiting and one-way traffic from the alternator into the battery, this so any size 12 V alternator (and starter battery) can be safely connected to the lithium battery. The Charge Current Limiter protects the alternator against overload. Itmonitors and protects each individual battery cell within the battery (or battery bank) and will disconnect the alternator, charge sources or DC loads in case of low/high battery cell voltage or high temperature.

Features

• Alternator/Starter Batt+ port alternator and battery protection: The input current on the
Alternator/Starter Batt+ port is electronically limited to approximately 90 % of the fuse rating.
A 100 A fuse, for example, will therefore limit the input current to approximately 90 A and
protects the lithium battery against excessive charge current and the alternator against
overload (most 12 V alternators will overheat and fail if running at maximum output during
more than 5 minutes).

• Remote on/off terminal: Use it to interrupt charging via the Alternator port while keeping the
BMS functionality active, or as an on/off switch to turn off the system completely.

• Load and Charge disconnect output1): The Smart BMS CL 12-100 monitors and protects each
individual battery cell within the battery and will disconnect the alternator, charge sources or
DC loads in case of low/high battery cell voltage or high temperature.

• Pre-Alarm output: Can be used to drive a relay, LED or Buzzer to issue a warning signal before
the BMS disconnects the batteries from the system.

• Bluetooth for monitoring and configuration via our VictronConnect app and with Instant
Readout the possibility to read out the most important values in real time without the need to
connect to the BMS, which enables diagnostics at a glance.

1) In some cases an interface cable will be needed, please see the manual.

Back to top